Introduction: There is a wide range of quick connectors available in the market, varying in material, specifications, and functions. Choosing the wrong connector can lead to leakage, inefficiency, or even equipment damage. How to select the "right partner" for your work system? This article will provide a clear purchasing guide based on five key dimensions.

Text:

1. Identify five key parameters to accurately match requirements

Before making a purchase, please ensure that you confirm the following information:

Medium type: Is it hydraulic oil, compressed air, water, or chemicals passing through? The medium determines the material selection for the sealing material and the joint body (e.g., NBR sealing rings are oil-resistant, EPDM is water-resistant, and PTFE is corrosion-resistant).

Working pressure and temperature: What is the system's working pressure and temperature range? Ensure that the selected connector has a sufficient safety margin in its rating (it is generally recommended that the rating be 1.5 times higher than the system value).

Interface size and thread standard: The diameter of the pipeline (such as 1/4 inch, G1/2) and the thread system (such as NPT American standard, G British standard, BSPP, metric thread). Size mismatch is a common error!

Flow requirement: What is the required flow rate? This is related to the size of the connector's bore. An undersized bore can cause pressure drop, affecting system performance.

Connection method: Is the mating required between a male connector and a female connector, or between two female connectors and a plug-in? Please specify the mating type.

II. Recognize common types and choose according to function

Hydraulic quick coupler: High pressure capacity, often made of steel, equipped with a safety locking device.

Pneumatic quick connector: It has relatively low pressure resistance and is commonly made of brass or plastic, emphasizing portability and speed.

Horizontal flow type/no overflow type: minimal medium overflow when disconnected, suitable for environments with high cleanliness requirements.

Check valve and bi-directional valve: Choose based on whether both ends need to be sealed to contain the medium after disconnection.

III. Pay attention to material and craftsmanship details

Body material: Stainless steel has strong corrosion resistance and is suitable for harsh environments or the food and pharmaceutical industries; carbon steel is economical and sturdy, suitable for general industrial environments; brass has good thermal conductivity and is commonly used in pneumatics; plastic is lightweight and inexpensive, suitable for low-pressure corrosive media.

Sealing materials: Commonly used materials include NBR (nitrile rubber), FKM (fluoroelastomer), EPDM (ethylene propylene diene monomer), etc., which are selected based on the medium and temperature.

Surface treatment: Treatments such as galvanizing, nickel plating, and blackening can enhance rust resistance and wear resistance.

IV. Precautions for Installation and Use

Cleanliness is important: Before connecting, be sure to clean the connectors and pipe fittings to prevent impurities from entering the system.

Align and gently push: When connecting, ensure that both ends are aligned with the axis, and push in evenly with force. Listen for a "click" sound indicating locking or confirm that the clamp is in place.

Regular inspection: Regularly check whether the seals are worn or aged, and whether the body has cracks, and replace and maintain them in a timely manner.

Strictly prohibit overuse: Do not exceed its rated pressure and temperature range.

Conclusion: A precise demand analysis is the key to successfully purchasing a quick connector. Investing in quality is always wise, as a high-quality quick connector can bring you long-term stable operation and returns.